 |
|
 |
|
|
| Q： |
Can I get my own custom design made? |
| A： |
If you are looking for a completely unique for your own design, or customized lettering, company logos and artwork for your vehicle, Auto Trim Express can arrange for you to consult with dedicated local artists and production teams who specialize in making your design dreams a reality. These talented craftsmen can dedicate the time and efforts needed to produce the designs you want at a reasonable price. Send your design requests to justtop@ms14.hinet.net for more information. |
|
|
|
|
| Q： |
How do I remove small bubbles in the finished Kit with adhesive products? |
| A： |
The best way to avoid bubbles in a kit is to take your time and make sure you have a clean surface for the adhesive products. Squeeqee the kit SLOWLY, press FIRMLY, from front to back, working from the center to the outside, doing small sections of the kit at a time. Even then, you can get some small bubbles which can be removed later by using a pin or sharp blade to cut the edge of the bubble and work the air or water out through the opening. Some small bubbles may dissapear as the kit dries. Kits can be installed wet or dry, but it is safer to install a kit wet. It can be pulled up from the back during installation in case you get a fold or large bubble. A dry kit may have less bubbles at first, but its a one way street, and there's no turning back. Once it's on, IT'S ON! As you get more practice and confidence installing kits, you will find it's faster to do dry installations. Most pro-installers prefer to install them dry as there is no drying time before removing the premask. |
|
|
|
|
| Q： |
What's the best way to install a kit? |
| A： |
They are so easy to use & assembly for read and pls to see an actual kit installation and familiarize yourself with our simple steps-by-steps to installing a graphics kit on your vehicle. |
|
|
|
|
|
| |
|
|
|
|
|